Electronic Detonator Control System (Wired)
Electronic Detonator Control System (Wired)
Electronic Detonator Control System (Wired)
Electronic Detonator Control System (Wired)
Electronic Detonator Control System (Wired)

Wired

Characteristic

The wired electronic detonator control system consists of a logger and blaster(s). The blaster is connected to detonators in a wired way. The wired system supports underground blasting. The main application field is an underground environment without explosive gas mixtures. The system supports blasting program import or on-site programming and can work at -30℃ temperatures.

Blaster (Red)
Device Capacity Typical 500 detonators
(Max 1000 detonators)
Blast Capacity (Cascade Mode) Max 20,000 detonators in one blasting
(20 slave blasters)
Communication Mode Wire connection
(Max 2km fire line)
Programming Mode Manual / Upload from U disk
Size 207.25*81.2*30mm
Available Languages English
Operating System Android 10
GNSS Positioning External
Firmware Upgrade OTA Through WIFI / 4G
Battery Type Li-lon Technology / 7.7V / 4750mAh
Autonomy of the Battery 8 hours
Charger Input: 100-240 VAC / 50/60 Hz, 0.6A
Output: 6-9 VDC
Rated current:1.5A
Fully charging time: 4 hours
Ingress Protection Rating IP67
Display 5 Inch
Communication Ports RS485
Operating Temperature -30℃~+60℃
Logger (Orange)
Device Capacity 1000 detonators
Blast Capacity (Cascade Mode) Max 20,000 detonators in one blasting
(20 slave blasters)
Communication Mode Wire connection
(Max 2km fire line)
Programming Mode Manual / Upload from U disk
Size 207.25*81.2*30mm
Available Languages English
Operating System Android 10
GNSS Positioning External
Firmware Upgrade OTA Through WIFI / 4G
Battery Type Li-lon Technology / 7.7V / 4750mAh
Autonomy of the Battery 8 hours
Charger Input: 100-240 VAC / 50/60 Hz, 0.6A
Output: 6-9 VDC
Rated current:1.5A
Fully charging time: 4 hours
Ingress Protection Rating IP67
Display 5 Inch
Communication Ports RS485
Operating Temperature -30℃~+60℃